VENTS VK ... reliable but also economical fans that offer the best ventilation conditions especially in areas with high humidity levels.
Thanks to the corrosion-resistant plastic housing, these models are the perfect solution for installation in ventilation systems in wet areas such as bathrooms, kitchens, cultivation chambers, etc.
The Vents VKO250 1080 m³/h Ø250mm ventilation fan with a powerful single-phase motor for 40,000 hours of continuous operation with overheating protection with automatic restart.
Compatible with pipes with a diameter of 250 mm, it is easily installed in any space and no tools are needed for its maintenance.
A support base is included to install it anywhere and in any corner of the ventilation system you want.
Χαρακτηριστικά:
- Maximun air capacity: 1080-1090m3/h
- Power: 173-207 W
- Frequency: 50/60 Hz
- sound level: 49-50 dB
- Voltage: 230 V
- Current: 0.76-0.9 A
- RPM: 2090-2120
- Protection rating: IP X4
- Weight: 4.5 kg
Detailed Dimensions (with support base) : ØD 25cm-ØD1 34cm / B 35,4cm / L 26,5cm-L1 3cm-L2 3cm-L3 4cm
* Connection cables are not included.
The general rule is to have a complete air replacement about every 5 minutes, or 12 times an hour (5 minutes x 12 = 1 hour). To find the flow rate in m³ / h that the filter fan should have for your space, you can calculate it as follows: Multiply the length of your room by the width. Then multiply by the height of your room. The result is the air capacity of your space in cubic meters. Finally, multiply by 12 to see how many cubic meters per hour the fan and filter you need to handle.
Example: Suppose a room is 4m long, 4m wide and 2.5m high. That is 4x4x2,5 = 40m³ (cubic meters). If we need to change the air every 5 minutes, we multiply the result by 12 to see how many cubic meters our ventilation needs to draw per hour. That is, for 40 cubic meters of space we need ventilation with a power of at least 480m³ / h.
